Where to Buy CBD Oil in UK: How To Make Cannabis Oil at Home – Easily!

Where to Buy CBD in UK:

Curious to see our newest video showing how we extract our CBD oil using C02 extraction?

Would you prefer to make your own cannabis extract at home? At Endoca, we’ll show you how to make Cannabis oil/CBD oil at home, EASILY!

At Endoca, we produce the highest quality CBD oil and Cannabinoid extracts, using state of the art lab and GMP procedure to create a true medicine that is helping thousands of people all around the world.
In this video, however, we step out from the lab and we explain to you how to make this medical Cannabis extractor CBD oil extracts at home.This is a more refined and safe procedure than the one explained by Rick Simpson who was the first person to make Cannabis oil or RSO Oil popular in the mainstream media. If you can’t buy the extract we make at endoca.com, make your own natural medicine using Cannabis.

What you will need in order to make your own Cannabis oil are the following: Cannabis or hemp plant material (dried and shredded), glass bowls, plastic spoon, alcohol (over 60% pure), Sieve, coffee machine, several Coffee filters (depending on how much material you have to process), water distiller or rice cooker or pan and hot plate
paperclip, cigarette lighter.

Make your own Cannabis oil at home, EASILY by following few easy steps. The first step consists of putting the cannabis plant material into a bowl and covering it with cold alcohol. Next, you will need to stir for three minutes with the plastic spoon and then sieve the mixture into another bowl. Then, filter the mixture through a coffee filter and distil the liquid until 80% of the alcohol volume has gone. If you use a rice cooker or hot plate to evaporate the alcohol, it is better to do this outside. Don’t forget however that the fumes are very flammable and could explode. Afterward, pour the remaining liquid into a small bowl and make sure you heat on the coffee machine hot plate for 24 hours in order to remove the remaining alcohol. The final step is to take a paperclip, dip it in the oil and try lighting it with a flame. If a spark occurs there is still alcohol left so you should place it back on the coffee machine for a few more hours.
If you would like to store the oil, draw it up into a medical syringe and keep it in your fridge.

Cannabis oil / CBD oil is our specialty at Endoca. We make the highest quality CBD oil and Cannabinoid extracts, using our state of the art lab, supercritical CO2 extraction process and GMP procedures to create a true medicine that is helping thousand of people all around the world. To find out more about our products,

Welcome to Endoca’s beautiful organic cannabis fields. Come I’ll show you Well, in order to make a good cannabis extract you need good starting plant material. In my hand I have a cannabis plant it smells fantastic. In order to make a nice extract you need to obviously dry the plant material first. Come let’s go to the lab I’ll show you how to make an extract. Welcome to Endoca. My name is Henry Vincente and today I will show you how to cannabis extraction using ethanol We will use cannabis material which is the leaves and the flowers all in one Very important to use organic so that you know there is nothing inside that can harm you. There are over 4,000 different varieties of cannabis now the one I chose has a lot of CBD inside. You could apply the same method or what kind of cannabinoid eschews so called ethanol take a ball put the plant material inside so the process has to be very fast. You don’t want the ethanol to touch the plant material to a long time. If it does you get a lot of other stuff inside which you don’t want. You just use enough ethanol to cover so that we can separate the plant material from the cannabinoids. You need to be fast in this process because we can only stir for three minutes so I use a plastic spoon. You don’t use mechanical devices because you don’t want to create a spark. If I create a spark now everything will burn. You mix well then we have to separate the ethanol from the plant material. I do simply by taking a sieve and put it in another Bowl. It can drip a little bit you know there’s still some alcohol left This was the first filtration now we’re going to do the second filtration in order to remove the plant material you have left, and we do that by using a simple coffee machine It can heat your material and it can filtrate and we start with the filtration part coffee filter, take your spoon you take now the material on the liquid and you pour it into the filter paper and you see the process starts. In order to accelerate the process we change the paper, every time a single filtration has occurred if you have more material you just continue until you don’t have any more, and like this and it’s dripping beautifully. Now it’s time to cook so when you cook at home you can use many different things I have here an example of a rice cooker which works fine a pot and a heating device works also fine and a water distiller. Now my favorite is the water distiller because if you cook with any of these methods we need a cleanroom box like this for those of you who doesn’t have a box like this you can cook outside but to make it all easier let’s use the water distiller. Now this is the process where we separate the ethanol from the cannabinoids. The time it will take for the full separation depends of course of how much material you put inside I use a bowl to collect the pure ethanol that’s going to come out here because you can you reuse it again and again we give it some juice and we wait so now the question is when to stop I can see I have 80% of my original ethanol volume so that’s indication that it’s time to see what’s going on inside you open the lid slowly and look inside and you can see that is very little material in my case this is the time to stop just to be sure not to breathe it here we go and be careful when you pour because there’s very little material you don’t want to lose it and now I’m going to show you the final step using the coffee machine what we have to do is remove the remaining ethanol from our extract put it on the heating device turn it on and we wait best is to wait for 24 hours so that you’re sure that no ethanol is left I already did this and as you can see from all the work with it we have very little material the final test is a quality test we do it by using a paperclip dipping it into the material and you use a lighter you light it fast and see what happens if there is a spark you know there is still ethanol left so you can see comparison see it’s burning then you need to put it back on the heater but in our case it was well done. To make a cannabis extract at home you need a lighter filter coffee machine some small bowls, two bowls sieve plastic spoon coffee filters alcohol cannabis. Put the cannabis into the bowl cover with cold alcohol steer three minutes with plastic spoon filter the alcohol through the sieve filter again through the coffee filter it still until 80 percent of the initial alcohol volume is gone pour into a small ball hit the small ball with the coffee machine for 24 hours to remove the remaining alcohol. To check if there is any remaining alcohol use a small spoon and the lighter if there is any remaining alcohol the product will produce sparks when burning with a lighter keep heating until you don’t get any sparks anymore Enjoy your cannabis extract Stay tuned next time I’m going to show you how to purify the extract and turn it into pure cannabinoids in my hand is 99% CBD beautiful crystals See you next time

You May Also Like

- - -